Pentair Chlorinator Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Pentair Chlorinator cap always takes a board between the tabs to get it open. I decided to print a cap that I can…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 560
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
My Pentair Chlorinator cap always takes a board between the tabs to get it open. I decided to print a cap that I can mount a 1 1/2 inch board that will give me the torque needed to take it on and off.
I used to have to replace the O-rings every year but about 10 years ago I cut a piece of 1/4 inch rubber to fit in the top and it has held up to this day. It also keeps any chlorine from
contacting the cap.
I use ABS on all my pool stuff with great luck. They might discolor slightly but my Polaris pool parts have held up well. I suggest printing this from ABS.
Hope you find this useful.
Cheers
Kisssys
Category: Outdoor & Garden