Seat Leon 1m1 Speaker Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover to steer water away from the speaker opening.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had the window regulator fail and had to tear the door open and doing so I noticed that the speaker had let water through and had corrosion in the back.
I just modeled this simple cup to steer the water away from the speaker opening and glued it in place with windscreen adhesive.
I have no Idea if this has any effect on sound quality of the speaker as the speaker is originally open to the door cavity and to minimize problems I added a port on the underside to equalize the pressure if there is need to. Atleast my Gladen M-lines work fine off the headunits 50w amp and I cannot tell if its any better but it's not worse than original and should not drip water on the inside.
This mod does NOT impeed with the window regulators motion and the window goes down all the way.