Depth Gauge Base for 8mm Dial Indicator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D-printed base for a depth gauge dial indicator, designed to help with precise measurements when setting up a
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is a 3D-printed base for a depth gauge dial indicator, designed to help with precise measurements when setting up a planing form for bamboo rod building.
The base is designed to fit a standard 8 mm stem dial indicator, which is secured in place using an M4x10 mm screw.
To improve stability and measurement accuracy, the body of the base is hollow, allowing it to be filled during printing to increase weight. In my case, I filled it with 4.5 mm steel BBs (airsoft pellets), reaching a total weight of over 150 g, which significantly improves stability during use.
Features
Compatible with 8 mm stem dial indicators
Secured with M4x10 mm screw
Hollow design for customizable weight
Improved stability for precise measurements
Ideal for bamboo rod planing form setup
Notes
You can pause the print and fill the cavity with your preferred material (steel balls, sand, etc.)
Heavier base = better stability and more consistent readings
If you find this useful, feel free to remix or improve the design!