Carrying handles for 90L sandblasting cabniet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of handles for carrying the 90L sandblasting cabniet avaliable from various brands
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
A set of handles to add to the generic 90L desktop sandblasting cabniets avaliable from different brands. This makes it easier to pick up and move between where I store it and where it is used
I have tested on a Pollor brand cabniet but when I ordered this one there are lots of other brands selling what looks to be the same unit with different branding.
Printing and installing
The handle is best printed with the handle surface facing up to avoid any rough edges on the bits you hold (STL is in this orientation). this will require some supports for the part under the cabniet.
The handles fit onto the bottom of the chasis, to fit remove the two nuts on the rear two of the middle set of screws holding the side to the base (should also work on the front). Fit the handle over the two bolts and reattach the nuts to secure in place. There is room for a 10mm socket to fit into the nut recess to do this.