SOTABeams 10m travel mast end caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
End cap replacements for both ends of the SOTABeams 10m travel mast.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
End cap replacements for both ends of the SOTABeams 10m travel mast.
These are designed to be printed in TPU95, but they can probably also be printed in other strong flexibles. Solid materials such as PLA and PETG will not work. I printed them with 0.24 mm layer height and draft settings on a Bambu P1S, but other settings may work fine.
The top fits snugly, and can be removed about as easily as the original.
The bottom uses the ledge above the threads as a leverage for snapping to the mast.
This may not fit the model with the metal end, as it's only been tested on the plastic version