1 / 4
3xE27 lamp (mount, wago and sockets NOT included) — zdjęcie 1
1 / 4

3xE27 lamp (mount, wago and sockets NOT included)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

⚠🚨⚠ LEDS ONLY ⚠🚨⚠ A decorative lamp you fill with E27 generic sockets, looks STUNNING with Philips Hue bulbs.

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
45
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Public Domain

⚠🚨⚠ LEDS ONLY ⚠🚨⚠

I'm not actually sure how safe it is...

for simplicity I recommend PLA (mine didn't melt yet)
for safety I recommend ASA-FR
the rest is up to you
as always excercise care with wiring first and foremost
turn your breakers off buh

also recommend WAGOs
and if you're using stranded wire
FOR THE LOVE OF GOD CRIMP IT EVEN IF YOU HAVE A CHOCO TERMINAL

Also working on a switch and an outrunner ceiling fan attached to the bottom of this would be neat so if you want that you should hold off on printing... maybe i should give yall a mounting solution before then, i relied on the sheetmetal thingy from the previous lamp that was on there (which promptly failed, somehow before the PLA lamp)

Changelog:

14.7.2026 ★☆✿✧✦✧✵✸✺✻✼✽✾✿✧✦✧★☆✿✧✦✧✵✸✺✻

  • Removed V1 with writings and TTK logo (4mB)

  • Added a plain model (790kB, and easier to print)

  • Because I removed the logo the model is now Public domain.

  • Enjoy :3

Tagi