Thor - Can Holder / Beer mug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can Holder for 0.5L Cans (12oz+330ml can inserts)
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thor - Can Holder
Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz or 330ml (slim) cans (link below)
Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, brim, Automatic (28°) tree support, It is necessary to set supports even under small overhangs, added supports under the hammer, see picture below.
Remove the supports wisely, very very!! carefully with pliers, especially around the hammer. It is better to spend 5 minutes removing the supports than to have a ruined piece.
Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz , or 330ml slim cans, and 10mm riser if you want better access to the top. They are scalable, so you can make them smaller or larger in your slicer.
https://www.printables.com/model/1322047-can-holder-riser-inserts-12oz-slim-330ml-scalable
Happy printing:)