1 / 4
Filament adapter for 0.25kg to 1.0 kg spools. — zdjęcie 1
1 / 4

Filament adapter for 0.25kg to 1.0 kg spools.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Made to adapt small spools to fit the AMS

Ocena
5 / 5
Polubienia
5
Pobrania
57
Wydruki
1
Wyświetlenia
135
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

A two piece adapter for small 0.25kg filament spools. It slides in the center of the filament spool and makes it fit the AMS like a full sized spool of filament. 

It takes ~1:15 minutes to print on my Bambu lab P1s with standard settings.

I recommend using electrical tape on the outside surfaces because it will allow the parts to grip each other and work with the AMS

Make sure the smaller spool moves with the adapter, otherwise it will not work the AMS.