1 / 2
Fibonacci Whirl-A-Gig II with Nutating Rings (Optical Illusioned) — zdjęcie 1
1 / 2

Fibonacci Whirl-A-Gig II with Nutating Rings (Optical Illusioned)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an improved Whirl-A-Gig from one I printed a couple of years ago. It includes an optional Optical Illusion.

Ocena
4,5 / 5
Polubienia
7
Pobrania
10
Wydruki
1
Wyświetlenia
120
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The fan blades are based on the Fibonacci curve, which is used extensively throughout nature to provide improved efficiency.   Artist also used the Fibonacci curve to locate the point of interest in a painting.   

This design is an improvement from a previous similar design (Fibonacci Verticle Whirl-i-Gig) by having a  simpler design.  This revised design added an Optical Illusion and secures the system to the railing with 1"  Velcro straps.  (Amazon:  Novana 30 ft x 1" hook and loop strips @ $9.98).  The original design on Printables.com provides a discussion on Fibonacci.

It works with wind from any direction and is very responsive to low wind speed.

The two rings provide an optical illusion, where they seem to roll on each other.  These rings are optional and do not need to be printed.  Printing the rings needs support.  There are two small flat surfaces on the rings, which facilitates printing. I used tree supports for the rings and no support for the other parts.  

I made one of these out of PLA and it collapsed within a few hours from the heat of the sun. Please use PETG, which works well. 

Note that the movie shows the fan moving faster than it actually did with a 5 knot breeze. 

Tagi