1 / 3
Porsche 944 Torsion bar indexing jig — zdjęcie 1
1 / 3

Porsche 944 Torsion bar indexing jig

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple jig to measure loaded and unloaded trailing arm angle on a Porsche 944.

Ocena
0 / 5
Polubienia
3
Pobrania
7
Wydruki
0
Wyświetlenia
86
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

Simple jig to measure loaded and unloaded trailing arm angle on a Porsche 944. Limiting block/spacer must be removed to measure unloaded/full droop angle.

My car had a bachelor's lean and all driver measurements were lower than passenger. I've averaged the two for the model with baked in stock measurements.

You can follow the procedure on Clark's Garage to calculate out new values if you're changing torsion bar size/spring rate. https://www.clarks-garage.com/shop-manual/susp-06.htm

Tagi