Filament spool RFID / NFC tag holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for 25mm RFID tags, either fit within the cardboard spool or hung adjacent to the printer's RFID antennae.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 543
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
RFID / NFC tag holder for various brands of cardboard spools, sized to insert within the cutouts of the spool. A hole at the top can also allow you to hang the tag, either against the printer (for use with a drybox) or next to the spool when in storage for easy identification. Location of the tag has been tested to work with the Snapmaker U1. Bottom of the tag (for the non-blank models) has room for a 12mm label. Placing the tag on the side alllows for the spool to freely roll from either the center or along the bottom.
Edit April 7 - V2 files have been added - added some ribbing to give a tighter fit within cardboard spools and facetted the faceplate to try and avoid knocking the holder loose when shelving spools next to each other.