1 / 1
7th Gen Ford Truck Radio Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits a BOSS (616UAB) Radio for a 7th gen F-150/250.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this to fit a BOSS single din radio (616UAB) into my 1982 Ford F-250, I had a plastic insert in the truck that allowed for 4 sheet metal screws in each corner for fasten the panel into place. Hopefully someone else has a need for this.
The tolerances were very close to fit the radio from the backside. I didn't mind but you may have to tweak.
Printed in PLA but recommend printing in ABS.
