Beyblade X Balance Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A balance tool for Beyblade X beys/ratchets. Needs a 608 size bearing.
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 530
- Wydruki
- 2
- Wyświetlenia
- 2668
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Updated 5/29/26!!
- Changed shaft interface to reduce error in assembly
- Increased thickness of parts to increase durability
Use this tool to help balance the ratchet on your Beyblade X beys. I saw too many people selling a simple bearing on a stick for $15-35, so I made my own. Uses a single 608 Bearing and a M3x12mm or 4-40 0.5in screw. Supports recommended. 0.16mm layer height recommended.
Assembly Instructions:
Insert 608 size bearing into "Bearing grip."
Place the bearing with Bearing grip onto the small shaft of "Bearing holder" with the larger opening facing towards the bottom.
Insert "Balance tool bit" into the top of the bearing, making sure to align the square hole with the square post on "Bearing Holder."
Insert screw through bottom of Bearing holder until it is finger tight.