Bench Vise Pads
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bench vise pads for fixing pipes with magnets
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 708
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Inspired by TD3D I made my bench vise pads fitting to my bench.
It has notches for better fixation of round objects. For a better fixation on the bench there is the possibility to add 3 pieces of magnets 3 x 10 mm at the upper side. They can basically just be pressed in, additionally I added some glue.
The bench vise clearing is 126.0 x 22.0 x 11.5 mm
Users of FreeCAD can use the model file to adjust parameters in the spreadsheet params like:
- dimensions of bench vise
- dimensions of magnets
- dimensions of pipe notches
Printing needs support, I propose to print it either like in the model or turned by 180° in order not to stress the layer adhesion.
For material I have taken PETG with 100% infill.
Since V1.1.0 you can create also models without magnets and pipe notches. This variant I have printed in TPU with 100% infill for fixing sensitive objects.
Version History
V1.1.0
- Added “flexible version” without magnets and pipe notches
V1.0.0
- Intial version