Twisty strips pendant lamp shade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lamp shade for the Ikea HAVSDJUP cord set (or something with a 40mm socket)
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Had the Ikea HAVSDJUP cord mounted in my office, and had no lamp shade.
Fiddled around with Make My Vase, and created this. Added a 40 mm hole (negative modifier) to mount it on the cord, plus my logo (as a cutout for ventilation).
Compatible with other 38 - 40 mm E27 bulb sockets.
Prints in vase mode.
Powered by MakerWorld-Make My Vase (https://makerworld.com/makerlab/makeMyVase)
Remember! Clean your bed thoroughly before printing:
Wipe away any dust or debris.
Wash with dishwasher detergent and dry it with a paper towel.
Wipe down with isopropyl alcohol using a clean, dry lint-free cloth.
Make sure the bed is completely dry.
If needed, apply glue or other adhesion aid for better results.