ssd mount for hotshoe/coldshoe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
an nvme ssd mount for camera
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi it's my first design so please be gentle.
I needed an ssd mount for my lumix camera, camera world being expensive I've searched for a simple nvme usb-c adapter (i used this one: https://www.amazon.fr/dp/B08DCXB3CD?ref=ppx_yo2ov_dt_b_fed_asin_title) to mount it on my camera. And since I wanted to be as little and as clean as possible, I disassembled the adapter and fixed it with some two side glue tape (like the tape in the photos) then mounted the nvme inside. It is basically the same box as the original but with holes on bottom to put a camera shoe on it.
for the hardware i used:
at least 2x M3 heat insert (4mm length and 4.5mm wide)
2x 8mm m3 screws
1x m1.5 heat insert (2mm length and 3.5mm wide)
1x 4mm m1.5 screw