Rivet holder for Rivdom eBZ Zero
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a rivet holder for my rivet gun
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I made a rivet holder for my rivet gun, its made using the old model, but should work in both the small and big new rivet guns.
This version is a bit longer than the original and is better at pushing the finicky senor that with the original one was difficult to push
Orientation and supports:
It should be printed with the fillets near the build plate and using support for them, the top can bridge so there's no need.
Material:
I tried printing it in pla and abs but both broke, i suggest doing a test fit with pla and then using some CF reinforced engineering material, i used PP CF but PC CF or other should work as well
If you like it, do the stuff and the things for prusameters, thanks