Child Door Lock (Kwikset Halifax)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is designed to block the door handle lever from being pulled down, it can only be lifted up.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I created this to keep my toddler from pulling down on the lever of the door handle to open doors. I tried to keep it sleek but strong enough to defend against her ever growing strength. I also didn't want to put holes or anything sticky on the paint of the doors around our house. You will have to unscrew your door handle and place this inline.
I'm sure eventually my toddler will be tall enough to pull the handle upward, but this buys us some time.
This takes 58 minutes to print on my Prusa MK4S, I used PETG for strength, and it uses 12.67 grams of filament. Size is 68.5mm x 73.5mm x 63mm