Stopper/Cap with Retainer for Pill Bottle/Vial 30.5mm ID
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This "stopper" replaces the "safety cap" on a plastic pill bottle, to enable easier re-use.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
A note of caution: Safety caps are put on pill bottles for a good reason - to help prevent children from eating the "candy" in the bottle - so don't remove this important safety feature from a bottle containing medications. I like to re-use empty pill bottles for storing small parts, etc., and that is the only time I plan to use this stopper.
I made this stopper for the pill bottle shown in the photos. The bottle has in ID of 30.5mm; I am guessing that this print could be scaled to fit other size bottles, but I have not tried this. Even though the original safety cap is reversible to disable the safety feature, the cap can still get misplaced when it is removed.
One down-side to this stopper is that an empty vial will not stay upright, but that is an easy enough issue to work around. However, I have included a second version of the stopper without the retainer feature so that is an option you can choose.
This is designed to be printed in a flexible filament.
Assembly and Use
Fasten the retainer ring around the OD of the bottle as shown in the photos.
Print Instructions
Print in FLEX using the 3mf files provided, otherwise :
0.2mm layer height
2 perimeters
15% grid infill
3 top solid layers (optional; I reduced the layers to speed up printing and use less filament)
CAD
The OnShape 3D CAD files for this are here :