1 / 1
5015 fan duct remix for Tronxy XY 2 pro
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
24v 5015 fan duct remixed for Tronxy XY 2 pro.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I hope I helped someone because I couldn't find any 5015 fan duct for Tronxy XY 2 pro.
layer height 0.2; infill better more than 25%; in your printer bad at overhang(like mine) i recomend to cut model at 5.10mm or 25 layer and use autoOreintation(in orca slicer) idk if other have that, i can post mine it shows error sorry for that. Good luck.