Kitchen Sponge Holder - Holds Two Sponges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sponge holder for kitchen sponges. Can hold two standard sized foam and silicone sponges.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 145
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
A sponge holder for kitchen sponges. Can hold two standard sized foam and silicone sponges. Cutouts aid in drying the sponge, and an integrated dish catches drips. The model has a void in the based so weights can be added while printing to help prevent tipping.
The project was written with OpenSCAD and is open source. For the original project files, see: https://github.com/CharlesLenk/sponge-holder
Printing
This model is designed to be printed on a standard consumer grade FDM printer with a 0.4mm nozzle. Any standard filament can be used, but PLA is recommended because it's low cost and handles overhangs well.
If you want to add weight when printing this model, add a pause step before before the top is added to the interior void:
During this pause, place the weights you plan to use inside the print, then resume. Wheel weights for cars are an inexpensive option. I used 0.5 oz square wheel weights when printing this model.
Dimensions
The sponge slot interior is
80mmx92mmx24mm(H x W x D).The holder itself is
97mmx97mmx55.5mm(H x W x D).The bottom void for weights is
8mmx72mmx30.5mm(H x W x D).