Del Sol fan knob (climate control)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan knob for the Honda Del Sol
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE 2026: Added new multi material version so it can print both the knob and clear slit in a single piece, I haven't tested it yet because I don't have a multi material printer so let me know if it prints good.
This is a replacement fan knob for the Honda Del Sol. I did lots of test prints to get the fitment just right.
This includes the slit to print in transparent to allow the back light to still work, or alternately you can choose to print the slit in white or any other color. Just put a dab of glue on the slit and slide it in the knob.
NOTE: You don't need to use the old metal sleeve that the OEM knob had inside it, this connects directly to the fan switch prong
PRINT SETTINGS:
Any hard filament will work
.2 layer height for nice surface finish
Support needed, I print it tilted toward the front (where the slit is), it seems to print nicely this way
If you would like to leave a tip for my hard work you can do so here :D https://www.paypal.com/ncp/payment/Y5DRF7PN8S5AJ