5th Gen Ram 2500 Center Console Brodit/Proclip Mounting System

Needed a good way to store and charge my phone in my 2025 Ram 2500 while driving.  I wanted something for both long road trip (hard wire charging for Android Auto/Spotify) and something convenient for in town trips like a mag-safe charger.

I found a mounting system on Printables that inspired me to create my own mounting system for Brodit/Proclip device holders.  I had a bunch of them laying around from previous vehicles and figured I'd put some of them or some of the parts of them to good use again.  

This console mount will accommodate two device holders, I used a universal phone holder I already had, and 3d printed a device holder for the Apple mag-safe charger I had.  Gives me the best of both worlds, good spot for hardwired charging, and quick and easy wireless mag-safe charging.  I also wanted to keep the cables from being a mess, so I added cable routing tunnels on the reverse side to route them behind the plate.  

Very happy with my setup now, and kudos to the original creator for making a solid base to work with.  

The thread rolling screws that come with the various Brodit/Proclip device holders were re-used on this plate, the holes in the part are the perfect size for those screws to grip without the need for any sort of threaded inserts.

I printed this in ASA on my Bambu X1C with a .6mm nozzle on a textured PEI plate

• .18 layer height

• One wall on first layer (for better appearance)

• 2 wall loops

• 3 top/bottom shell layers

• 20% gyroid infill

• I painted supports under the lip overhang, may not be necessary but my test print was bad without supports