1 / 4
Garden sifter/sieve designed entirely in PrusaSlicer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A garden sieve, entirely designed and customisable in PrusaSlicer
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
The model uses a cylinder for the outer shape, a negative volume cylinder that cuts out to form the inner shape, and a modifier to print zero top and bottom layers for the bottom.
It seems that the hexagon infill prints (alternatively) with one or two lines, hence it probably is the strongest of the infills.
You can change everything in this design without leaving PrusaSlicer.
The idea of using infill as the sieve was taken from @PsimaxAerospace, but I wanted a singe-part print.