Martela Logic 400 armrest adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With this adapter, you can use Isku Step softfoam armrests in Martela Logic 400 chair.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — NoDerivatives
Note! You need Isku Step armrests from e.g. damaged chair. You also need some d4*20-25 mm plastic screws (4 pcs) to attach the adapter end pieces.
Start by dismantling the Isku armrests. Remove first two large flathead screw underside. Lift the armrest up and then dismantle the sliding mechanism. It is held by three Tx25 screws and one of them has a nut insert. Please save all the screws, nut and the sliding mechanism, you need them with the new adapter assembly.
When assembling the armrests, do the reverse. Note, that you will have to install nut insert first to adapter, then slide and lock the adapter to Martela chair and then continue by installing the sliding mechanism. Otherwise Tx25 screw will prevent adapter sliding in place.
Printing large parts in vertical position is recommended as the support material might be hard to remove.