Mechanical Counter - 1 Way
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully 3d printed model of a mechanical counter that you can only increment using a lever
- Ocena
- 2 / 5
- Polubienia
- 6
- Pobrania
- 22
- Wydruki
- 2
- Wyświetlenia
- 145
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
Please use the lowest infill possible/ideal.
To build the thing, please use exploded diagram
Assemble the model in the following order
1. Assemble the ratchet system on the stand using the exploded diagram in onshape. Use the C shaped clips to secure the levers after placing them in.
2. Add the number gear with the extrduded ratchet gear ensuring everything fits
3. Add the gear transfer thing to the model using the largest bolt printed and secure it using the largest C clip
4. Add the second place number gear
5. Add the left stand and super glue it to the centeral axle and the main stand using superglue/glue.
For the whole assembly, please refer to exploded diagrams created in the main onshape file
Video Demo: (Counting down from 20 to 1)