1 / 4
Under shelf , back of closet, space saving holder/hanger for ties/belts etc — zdjęcie 1
1 / 4

Under shelf , back of closet, space saving holder/hanger for ties/belts etc

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

minimalist, under-shelf hanger to use the wasted "dead space" at the back of the closet, prints without supports.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
93
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Minimalist, under-shelf hanger.
It holds (at least) 20 ties and/or belts etc in the gap between your hanging clothes and the back wall.

It clips onto standard 13mm (Vedum-style) shelves (step file included if you need other dimensions).

Print 10 of the hooks on the flat side down without supports, and one of the brackets on its flat side, and hook them in to each other. I added some glue just because, but it was probably not needed.

I printed mine in PETG, to get some flexibility. PLA would probably be fine as well.

I used 4 walls and 10% gyroid infill on the 0.20mm balanced profile on my Core One with a .4 nozzle.

Tagi