Donic Outdoor Roller - Replacement Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are replacement parts, that you might need after you've crashed into the folded table and broke something.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
I was mildly annoyed because Donic's support didn't answer my request for replacement parts.
So I measured, designed and printed it.
Here's what you can replace:
- Part 3.4 (works on both sides)
- Part 3.2 (left side only, need's to be mirrored if you need to replace the right side)
- Part 40
Part 3.2 and 40 are used for the assembly in H4 (check images from their manual).
For structural reasons, I have changed the design to make it more beefier (therefore you will need a longer screw, but I'm sure you will figure that out yourself).
Print in PETG and with support. Enjoy.