System 58: "Micro" Box; incl. FreeCAD design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
1,06 € – 1,29 € netto (bez VAT)
Dla pliku: box-micro-lid_0.4n_0.2mm_PLA_MINIIS_47m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,18 € netto (środek widełek).
- Masa podana przez autora
- 23 g
- Czas druku podany przez autora
- 46,8 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
The "Micro" box for 2×2 inserts
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v3.0
This box is part of the "System 58" collection of boxes. It can be used standalone, e.g. for storing common USB devices. Or it can be used with most of the "System 58" inserts to turn it into a small sorting box. See the pictures above for examples.
Only minimal supports and minimal assembly are needed.
On the outside it is 122×128mm, 33mm high; inside usable space is 116×116mm, 31mm high; or enough space for 2×2 basic inserts.
Compatible System 58 boxes and inserts: https://www.printables.com/@konrad_2520545/collections/3048692
Printing
Normally any material will be fine for those boxes. Only minimal supports are needed.
I included GCode for Prusa MINI+ and MK4s (w/ HF0.4 nozzle) using PLA.
If you want to use a different material or a different printer: start from one of the included Prusaslicer project files (*.3mf) and adjust your settings.
Printing from STL
Print the Box standing normally. No supports are needed. I would recommend to increase the number of perimeters, since it prints faster if the slicer does not attempt to create infill.
Turn the lid upside down and print with bed supports for the protrusion of the lock/hinge at the front. Make sure you only use supports from the print bed, so that the slicer does not clog up the hinges at the back.
The hinge/lock should be printed lying flat on the bed. No supports needed.
Assembly
You can connect the hinges at the back of box+lid with a short piece of filament. Lock the filament in place with a single drop of super glue at one side - make sure to only glue it to the box, not the lid. The same works for the hinge/lock at the front.
If you need a detailed description check the original box here: https://www.printables.com/model/1646802-system-58-sorter-box-improved-mini-box
Instructions are identical for all sizes.
License
I chose GPL deliberately: I want this design to remain free. Feel free to print as many as you like, feel free to sell your prints. But, if you give prints away or sell them include a link back to here or give the recipient the original design files; if you change the design or add features - please publish your "sources", a'ka CAD files under the same license.
The included CAD file of this design was made with FreeCAD 1.0.2. I tried to label all features to make it easy to understand what was intended. Send me a message if you have questions.