1 / 2
Handle for Folding Door
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple model designed to fit in the gap between folding doors. Double sided tape should be good enough to hold it.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
A simple model meant to fit in between the gap of a folding door and secured with double-sided tape or something like sticky tack.
The knob on these folding doors was screwed into the side that remains in the track so opening them was annoying. This makes it a bit easier.
Printed upright in PLA with I think 20% infill, no supports, and then painted to match the door.
There may be a bit of trouble with the overhang, but this will not be visible.
The openscad file is included.