Modular EMP gun
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular EMP gun which you can upgrade. The main module includes: a laser, a flashlight, and a voltmeter
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my latest project: an EMP gun. It’s basically a power bank with two 18650 batteries in a single hub to which additional modules—such as an EMP gun—can be connected.
If you have any questions, I'd be happy to answer them
What’s inside the control hub:
3 small buttons to control the laser, voltmeter, and flashlight
1 large button to control the connected module.
I made a few modules: Teaser, a very weak coil gun, and antennas for the Teaser (which turns it into an EMP gun)
I used a USB-C charging module with a USB-A output. The laser and flashlight run on 5V, so they’re pretty powerful (at night, the laser can easily reach my neighbor’s house). But be CAREFUL with the EMP or teaser, because they use very high voltage, which can seriously hurt people with heart conditions.
I used 1 mm enameled copper wire for the coil.
The modules connect using 5x5x5mm magnets.
Connect the batteries in parallel (positive to positive and negative to negative.
The parts I used. Most of them are from AliExpress, but the buttons are from a Czech online store (the last 3):