Panda Breath Cable Gland for Snapmaker U1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cable gland for a Panda Breath mains cable to fit the Snapmaker U1.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 204
- Wydruki
- 2
- Wyświetlenia
- 1258
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I didn't like the cable routing for the Panda Breath on my Snapmaker U1 so took the plunge and decided to drill a hole in the back window. Easily plugged if necessary.
Use the drill guide (with the flat edge against the bottom outside case) to drill a 2mm pilot hole. Then use a step drill to enlarge the hole to 10mm (take it slow and easy).
Cut the C14 mains plug off the end of the cable. Push the wire through the cable gland (it's a tight fit on purpose so chamfer the end to help it get through). Put the nut on the outside; finger tight plus a teensy weensy nip up. Wire a new C14 on the cable.
I've include the Fusion 360 file in case you want to modify it.