Cromulons from the 5th expanse [Multicolor Main Head Remix]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NOTE: [To make the black Eye dots easier to print i simply had them at 200% in size in the slicer and it turned out…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
NOTE: [To make the black Eye dots easier to print i simply had them at 200% in size in the slicer and it turned out great.]
Did a simple mutlicolor remix of this one in meshmixer, just separated the Main body, Eyeballs and Eye dots so it can be printed using a multicolor printer.
Also made it into a fridge magnet decoration and added a cavity on the back and scaled it down a bit. A few drops of glue and a magnet in the back slot will do the trick.
Supports a magnet diameter up to 12mm (the one i had was 8mm).
But the original size is also included without the back hole and just a flat surface.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
I used 15% grid. But can probably be printed with 5% infill as well.
Filament: Filament PM Yellow and Local brand Generic PLA Black PLA Multicolor, Yellow, White, Black
Category: Decor