1 / 6
Magazine/Chamber Block for Ruger PC Carbine set up for Glock Mags — zdjęcie 1
1 / 6

Magazine/Chamber Block for Ruger PC Carbine set up for Glock Mags

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a chamber block for a Ruger 9mm PCC that is set up for Glock magazines.

Ocena
0 / 5
Polubienia
10
Pobrania
17
Wydruki
0
Wyświetlenia
233
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

This is a magazine block for a 9mm Ruger PC Carbine. The rifle can not fire with this installed but it does not satisfy the requirements for some competition shooting orgs because it does not fill the chamber. I may or may not add that depending on how bored I get in the near future. 

There are two versions - the first two photos are of the "final" version which has an angled base to match the angle of the mag well, and a cut out paw print. The last three photos are the orginal version which did not have an angle base and only has an emboss instead of a cut out. 

It may work in other 9mm PCC's that use Glock mags, I'm not sure.

Print this without supports. Use whatever material you deem safe for the temperatures it will see in a gun that's just been fired. 

If you are having trouble removing this from the gun, make sure that the bolt is locked open and not pressing against the mag block. 

Tagi