Sculpfun S9 Cable Chain Upgrade & Limit Switch Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Integrated supports for X/Y limit switches and dual-sized cable chains (7x15mm and 10x20mm) for Sculpfun S9
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Upgrade your Sculpfun S9 cable management and safety with this custom-designed mounting kit. Designed entirely in Fusion 360, these mounts provide a secure foundation for adding drag chains and limit switches to your machine, preventing wire fatigue and enabling accurate homing.
Key Features:
Dual Chain Support: Optimized for two different chain sizes to accommodate varying cable densities:
Left Side (X-Axis): Designed for a 7x15mm cable chain.
Right Side (Y-Axis): Designed for a 10x20mm cable chain.
Limit Switch Integration: Includes dedicated mounting points for limit switches to enable hardware homing and prevent frame crashing.
Perfect Fit: Specifically contoured to the Sculpfun S9 frame
What's Included:
sculpfun+s9+cable+chains+mount+left.stl(7x15mm mount)sculpfun+s9+cable+chains+mount+right.stl(10x20mm mount)
Print Settings:
Material: PETG or ASA (recommended for heat resistance near the laser/motors), though PLA+ works well.
Infill: 25% – 40% (Grid or Gyroid for strength).
Supports: Minimal supports required depending on your printer's bridging capabilities.