1 / 10
Porsche 356 Speedster Body Shell for Slot Car — zdjęcie 1
1 / 10

Porsche 356 Speedster Body Shell for Slot Car

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slot car body of the original Porsche, the 356.

Ocena
4,5 / 5
Polubienia
22
Pobrania
385
Wydruki
2
Wyświetlenia
2246
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

There are two versions of this model:

Porsche_356_Speedster_Body_Shell = Just the body of the 356 Speedster Porsche_356_Speedster_Slot_Car_Body = The body plus internal reinforcements and chassis mounting provisions

Approximate scale = 1:32             Body shell thickness = 1.6 mm

My other slot car designs:

Porsche 911 GT2

Pickup Truck

 

This model was created from the surfaces in the Porsche 356 Speedster model Alex Worsfold posted on GrabCAD.

I took Alex's model and closed all the panel gaps and gave the whole body surface a thickness. I then removed a quarter of that thickness to create the grooves that define the panel gaps for the hood, doors, and engine lid.

Notes:

As the model is thin (1.6 mm thick) I recommend printing with 100% infill. Although, depending on the number of shells you specify, the infill percentage may not even come into play.

*Enjoy and if you print one please post a make!*

Tagi