CHAINSAW MAN: improvment arms and head parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the model with enlarged arms and reinforced overfaces.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 467
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Share Alike
First of all, I really like this cosplay/project, and thanks to giedzinski for creating it. Below you can find a link to the original post, which also contains all original files.
What was done by me:
All parts were assembled into a single .blend file (I mainly work in Blender rather than CAD) and arranged as they are meant to be assembled. This makes it easier to understand where each part belongs. The author already provided excellent assembly instructions, but visualization is always helpful.
The openings in the arms were enlarged (my forearm - 30 cm, wrist - 18 cm).
Important: always check the dimensions. I adjusted them to fit my own arms, and the fit is quite tight. I recommend cutting the arm opening shape from thick cardboard to test whether it fits you before printing. This version is a good base if your arms are smaller than mine but larger than the original size - you can add foam padding if needed.
IMPORTANT: I split the parts to fit my printer (Bambu Lab A1, 256×256 mm build area), but in the blend file I left the parts as solid pieces so you can cut them to fit your printer’s build volume.
I also want to note that the new arms will not work with motors (I generally removed those features), since I did not plan to install them. However, the original teeth fit perfectly!
The overfaces were improved by adding a bottom reinforcement bar. It does not affect the appearance but removes plastic wobbling.
This cosplay also has some drawbacks:
The head is quite heavy and pulls strongly forward, putting pressure on the nose bridge. I would not recommend wearing it for more than about 15 minutes. The arms are not light either, but their weight is much less noticeable while wearing them.
Walking in the cosplay is difficult. Although the author designed eye openings, visibility is still limited, and in crowded areas there is a high risk of accidentally bumping into people with the front part of the head.
Files:
The first file is the main .blend file containing all parts, including materials to better indicate which plastic to print with and how everything should be assembled
Updated sprocket (gear) files resized to match the enlarged arms (not simply scaled - additional teeth were added)
Arm files labeled alphabetically - assemble them in that order
Improved overfaces
Print settings:
Printed in PLA, 0.4 mm nozzle, 0.2 mm layer height.
For arm parts, I recommend a bed temperature of 60–65°C and adding a 3–5 mm brim for large parts, with a brim distance of 0.08 mm (up to 0.15 mm) to make removal easier. This helps prevent edges from lifting and keeps the base surface flat.
For the overfaces, I recommend using supports to improve print stability (I printed them on an older Ender 3, and they tended to wobble during printing). On well-tuned or more stable printers, supports may not be necessary
The original author states that printing without supports is possible; I partially disagree — in many cases they are not required, but results may vary.
Many parts were printed in plain gray filament, then sanded and painted afterward.
This thing was created by Thingiverse user giedzinski and is licensed under Creative Commons — Attribution.
