Easter Egg Trio – Embossed, Partial Cut & Full Cut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easter Egg Trio – Embossed, Partial Cut & Full Cut
- Ocena
- 4,571 / 5
- Polubienia
- 312
- Pobrania
- 1406
- Wydruki
- 5
- Wyświetlenia
- 4313
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Standard Digital File License
Set of three decorative Easter eggs designed for 3D printing, each featuring a different level of surface detail and cut-through pattern. Perfect for seasonal decorations, table display, or Easter baskets.
Variants:
Version 1 (solid, 1 mm embossed pattern) – raised surface pattern (~1 mm), no cutouts. Clean and classic look.
Version 2 (partially hollowed) – partially carved pattern allowing subtle light to pass through.
Version 3 (fully cut-through / hollow) – pattern goes through the entire wall, creating a lantern-like effect.
⚙ Print Settings (General)
Printer: FDM
Material: PLA (recommended), PETG optional
Layer height:
0.16 mm (recommended for detail)
0.12 mm (high detail)
Walls (perimeters):
2–3 walls
Top/Bottom:
3–4 layers (for solid version)
Infill:
0–10% (mostly decorative model)
Supports:
✔ Optional for full cut version if bridging issues appear
Seam:
Back / aligned (to keep front clean)
Speed:
40–60 mm/s for best detail
Cooling:
100% fan after first layers (PLA)
Notes:
For Version 3 (full cut) → ensure good bridging performance
For Version 2 → slightly slower speed improves edge sharpness
Best visual result with white or pastel filament
Can be scaled (recommended ≥80% to keep details)