Nicgiga S25-0801-M Tray for 19" 1U Modular Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compatible half-width tray with an opening for a power cord or a PoE splitter
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Does not require any support. The emboss on the shelf part fits the switch wall-mount holes snugly and locks in with a small tongue -- requires a bit of force.
A small dovetail-shaped rail on the side was intended to mount an optional PoE splitter housing, but it seems unnecessary for my case, so I abandoned the idea (for now).
I printed it with PETG on Bambu P1S without issues, but I had to turn off cooling completely to avoid warping.
All the dimensions and arrow-shaped tongues follow the original. While the model is fully functional and sits in my rack at this moment, the tray itself sits a little loose in the bracket for my tastes (i.e. the inner printed part against the outer printed part). The lip prevents it from falling through into the rack, but nothing keeps it from moving out -- especially in somewhat slippery PETG.