1 / 2
Cable clip for Acorn 180 stair lift.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It may fit other models with a 6 mm opening in the channel.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Share Alike
We are rebuilding a stairlift and needed more clips to hold the charging cable between the top and bottom.
Designed in OnShape and snap into the channel securely without interfering with a standard CAT5 cable to deliver power to the off end charging pad.
Print on end. PLA shown and works fine, PET-G is also recommended, but not tested. I can print 50 in under an hour.
