Creality K2 Plus Tool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool Holder for the tools that come standard with the Creality K2 Plus, plus room for a larger scraper.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Tool Holder for the tools that come standard with the Creality K2 Plus, plus room for a larger scraper.
Features
Stores all the tools that come standard with the Creality K2 Plus.
Additional slot for another tool e.g. larger scraper.
Secured in place underneath the front/side of the printer without the need for magnets or screws.
Print settings
Property | Value | Notes |
Filament type | PETG/ABS/PLA | PETG preferred for resiliency. |
Filament color | Dark grey or Black | To match the side panel colour. |
Layer height | 0.2 to 0.3mm |
|
Infill | 5% |
|
Perimeters | 3 to 4 |
|
Support material | No |
|
Model orientation | Base on print bed. |
|
Clean up | N/A |
|
Assembly
Lift the right front corner of the printer up enough to push the Tool Holder underneath so it's inner wall is snug with the printer side, then pull the Tool Holder forward so it's snug with the printer's foot (see photos).