1 / 13
5060LP noctua shroud for asus and gigabyte — zdjęcie 1
1 / 13

5060LP noctua shroud for asus and gigabyte

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

5060lp shroud for noctua fans

Ocena
0 / 5
Polubienia
5
Pobrania
37
Wydruki
0
Wyświetlenia
431
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

You will need:

  • 4 × Noctua NF-A4x10 12V PWM fans (for both ASUS and Gigabyte versions)

  • 1 × M2 self-tapping screw (only for the Gigabyte version)

You need to modify the fan cables — please check the pictures I uploaded.

I made a custom 5060 LP shroud because the stock fans were driving me crazy. I really hate the ball-bearing noise, so I switched to Noctua 4010 fans.

Both the ASUS and Gigabyte RTX 5060 LP cards have the same noise issue, so I created two versions of the shroud

  • For the ASUS version: simple snap-in design — no bolts or screws needed, it just snaps into place.

  • For the Gigabyte version: you need one M2 self-tapping screw (check the uploaded pictures for the exact location).

when in idle you can't heared noise even full load sounds like just wind maximum temps at 80 degree ish

Tagi