Twisted Low-Poly Planter / Geometric Pot (Smooth Inner Wall)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add a modern, geometric touch to your home with this beautiful twisted low-poly planter!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 1
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Add a modern, geometric touch to your home with this beautiful twisted low-poly planter! The outside features a stunning 45-degree octagonal twist that catches the light perfectly – especially if you print it using Silk PLA or dual-color/co-extruded filaments.
Unlike many vase-mode prints, this model features a thick, solid wall and a completely smooth, cylindrical inside. This makes it perfect for dropping in a standard nursery pot or using it as a sturdy decorative bowl.
Features:
Elegant twisted octagonal exterior.
Smooth, practical interior.
Solid design (not just vase mode).
Recommended Print Settings:
Layer height: 0.15mm or 0.20mm (lower layer height gives an even smoother twist).
Perimeters/Walls: 3 or 4 (makes the pot sturdy and water-resistant).
Infill: 10% (only needed for the base).
Seam position: Aligned or Rear (PrusaSlicer does a great job hiding the seam in one of the geometric corners).
Supports: None!
I would love to see what filament combinations you use! Please post a Make and leave a rating if you enjoyed the design. Happy printing!