1 / 4
Clip-On Soft Vise Jaw Pads - Secure Fit Without Magnets, Parametric Remix — zdjęcie 1
1 / 4

Clip-On Soft Vise Jaw Pads - Secure Fit Without Magnets, Parametric Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of soft vise jaw pads - clip-on ledges hold pads firmly without magnets, side caps prevent lateral sliding.

Ocena
0 / 5
Polubienia
4
Pobrania
14
Wydruki
0
Wyświetlenia
42
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Clip-on ledges (serifs) The most important addition. Two small ledges are added to the inner profile of each pad - one at the bottom gripping the underside of the jaw, and one at the front edge gripping the top of the jaw. Together they form a snug clip-on fit that holds the pads firmly in place on the vise jaws.

These pads work great without magnets. The ledges alone provide reliable retention - the pads won't fall off or shift during use even without magnetic assistance. Magnets can be fully disabled via the magnets = true/false parameter if you'd prefer a cleaner, faster print.

A note on magnets with TPU: magnets are actually counterproductive when printing in TPU. Because the magnets are rigid, they bottom out against each other across the jaw gap while the soft TPU material between them hasn't fully compressed yet — meaning the actual clamping force is transferred through two small metal discs rather than the full pad surface. This can result in poor, uneven grip on the workpiece. For TPU pads, the clip-on ledges are a much better retention solution, and magnets are best left disabled.

Side caps Solid rectangular walls added to both ends of the pads. They prevent the pads from sliding sideways off the jaws. Thickness is controlled by thicknessSideCap. The overall width of the pad increases accordingly - width + 2 × thicknessSideCap.

Tunable ledge geometry thicknessSerif and depthSerif let you dial in exactly how thick and how far inward the clip ledges protrude, so you can tune the snap force for your specific vise.

Input validation assert() checks are included to catch impossible geometry before the slicer sees it - for example, ensuring magnet holes don't punch through the outer face of the jaw.


Current model is configured for

Parameter

Value

Jaw width

51.2 mm

Jaw height

12 mm

Top lip depth

6 mm

Pad thickness (jaw face)

5 mm

Clip ledge thickness

1.5 mm

Clip ledge depth

2 mm

All other values are parametric - adjust the variables at the top of the file to fit your vise.


Print settings

Material: TPU (flexible filament - essential for the soft jaw function and for the clip ledges to snap on without cracking)
Supports: Yes - required for ledge geometry
Layer height: 0.3 mm
Infill: 100%


In use

These have held up very well in practice. The flexible TPU grips the workpiece without leaving marks, and the clip-on ledges keep the pads securely seated on the jaws even under lateral force. No magnets required for everyday use - just snap them on and go.

Tagi