1 / 3
Airbus A320 Pedestal Rails for A320 Sim Guy's design — zdjęcie 1
1 / 3

Airbus A320 Pedestal Rails for A320 Sim Guy's design

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Premade rails designed for the Sim Guy A320's pedestal design, deigned for M4 heated inserts

Ocena
0 / 5
Polubienia
8
Pobrania
190
Wydruki
0
Wyświetlenia
867
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The Airbus A320 Pedestal as part of Sim Guy A320's project has a fairly complex rail for the top (well Airbus has a fairly complex rail for the top) and I decided to make a easily printed model. It has fairly large pieces (bed size >= 300mm) because otherwise they would be too many bits. The holes for sim panels are designed for M4 heated inserts (also why the panel is 10mm thick to give longer inserts plastic to bit into. Since I include the STEP files feel free to squish them as needed. For assembly mount to the top of the rail prior to putting the wooden brace into the main bay of the pedestal. Note the dovetail in the middle to join the halves (to fit on a print bed) is printed with a 3-degree draft angle so should lock nicely. It uses a 0.1mm tolerance to accommodate most printers. A little CA glue or 3D Gloop should easily attach the halves permanently.

The countersunk holes are for #6 wood screws (US screw approximately a 3.6mm wood screw. In MDF I use the coarse ones (similar to drywall screws).

Each of the holes has a colored part (optional) to print on a multicolor setup, just to highlight the holes. To make life easy, they all are called "Ring Highlight" so make them white or whatever you want. If you only have a single extruder or don't want a color highlight, well then set everything to the same extruder. With heated inserts I would use a minimum of 3 perimeters. My own color scheme is blue-gray with white highlights. The color only goes a mm down to keep multimaterial shorter.

Note there are separate STEP and 3MF for both rails (Right and Left)

FAQ:

  1. How can a PLA or PETG rail this thin support the entire weight of the throttle or such, while I lean on it during flight?

    1. Well it can't of course, and it doesn't. This screws down using wood screws ONTO the MDF rails from the original model (make sure to drop the height of the rail by the 10mm thickness of the print. This simply holds the inserts at the right locations, it is not structural!

  2. Do I need to use the highlight rings around the screw holes?

    1. Yes, simply because the I.D. of the hole is the correct size for the threaded insert, you can of course ignore them and simply print everything in the same color (i.e. extruder) to save time, they are purely cosmetic (and under your panels anyway). You can use the STEP file to boolean merge all these into one object if you hate having to select all of them. 

  3. Why aren't there locating rails on the bottom to square them to the MDF rails?

    1. Well a) because then if your rails aren't perfectly square you're stuck and b) I hate having to print with supports for no reason. I mean this isn't a precision machined part by any stretch of the imagination, it's MDF framed, so not a real issue. Since I always pre-drill a pilot hole in MDF you can pretty precisely place the wood screws.

Example color highlight rings (not sure why there is that rendering bug the objects don't overlap and don't display like that in CAD). All of this is modeled in OnShape. See the photos for a schematic of how the panels fit into the rails. Note you need a bottom rail for each top rail (but since they are the same between the side and main rails, no reason to repeat.

These sit like this (only the left rail is shown for simplicity)

Tagi