Spring-loaded Replicator 1 Drive Block - Modified Lever
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Derivation of the "Spring-loaded Replicator 2 Drive Block" by Makerbot Modified the MBE Lever to use a M3 x 8mm screw…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Derivation of the "Spring-loaded Replicator 2 Drive Block" by Makerbot
Modified the MBE Lever to use a M3 x 8mm screw to hold the 623ZZ bearing. This was done because I had an issue printing the bearing bolt stub, either being too weak to hold the bearing or over-sized and unable to push-fit the bearing in.
This is the main extruder used for my RepRap 3DPrinter, 3DPrintMi http://www.thingiverse.com/thing:95339
Parts:
- 1 x Compression Spring, 1.00" Long,.375" OD,.035" Wire
http://www.mcmaster.com/#9657k306/=10gvnbp
- 1 x M3 x 4mm
http://www.mcmaster.com/#92010A112
- 1 x M3 x 16mm
http://www.mcmaster.com/#91420A126
- 1 x 623Z Bearing
http://www.robotdigg.com/product/62/623ZZ-Ball-Bearing
Print Settings
Rafts:
No
Supports:
No
Category: 3D Printer Extruders