Direct Drive Vert-Xtruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Overview A Direct Drive Extruder with the Nema17 motor positioned parallel to the X Axis, suitable for printers with a…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Overview
A Direct Drive Extruder with the Nema17 motor positioned parallel to the X Axis, suitable for printers with a vertical X configuration. It is used on my RepRap 3Dprinter, 3DPrintMi http://www.thingiverse.com/thing:95339 http://www.thingiverse.com/thing:825277
Currently using a modified version of the MBE http://www.thingiverse.com/thing:1236065
Key Features
- Wade Extruder mount holes (50mm center to center).
- Accepts any lever mods already available on Thingiverse, Currently optimized for ivc's Spring-loaded Replicator 1 Drive Block
- Interchangeable clamp mounts to accommodate different hot-ends.
- For a perpendicular motor mount, use Direct Tito-V3
http://www.thingiverse.com/thing:292581
Update 3/23/2014
Ver 2 uploaded. Increased filament tube closer to the pulley drive Update 6/20/2014
Added new motor mount to accommodate the smaller diameter size of the MK8 drive pulley, untested! Update 4/27/2015
New VertX motor mount, added more hotend mounts. The VertX motor mount is best suited with the Replicator 2 lever extruder. Motor mount has been optimized for flexible filament.
Instructions
2 - M3 x 25mm for the base/clamp mount
2 - M3 nuts inserted into the base mount
Compatible with ivc's Spring-loaded Replicator 1 Drive Block http://www.thingiverse.com/thing:62510/#remixes
May also use the Spring-loaded Replicator 2 Drive Block (untested) http://www.thingiverse.com/thing:53125
Category: 3D Printer Extruders