Printrbot Top Z Axis Stabilizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printrbot Stabilizer mounted at the top of the Z -axis. Not sure if it reduces Z wobble but may provide more frame…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Printrbot Stabilizer mounted at the top of the Z -axis. Not sure if it reduces Z wobble but may provide more frame rigidity. I have no issues with Z wobble but if you're playing around with acceleration, doesn't hurt to add this.
Provided both 8mm and 12mm mount for the Printrbot and Printrbot Plus.
Can be clamped on and off for easier installation and the horizontal rod can be installed without threading through the parts.
Instructions
- Print two
Hardware needed:
SI
QTY
2 M3 x 14mm
2 M3 nuts
1 M8 x 400mm (plus), non plus (??)
4 M8 washers
4 M8 nuts
SAE
2 #6-32 x 1/2" (#5-40 or #4-40 may be a better choice)
2 #6-32 nuts
1 5/16" x 16" (plus), non plus (??)
4 1/4" washers (inner diameter is about 5/16", they will fit)
4 5/16" nuts
.IGES file included
Category: 3D Printer Accessories