1 / 6
Printrbot LC and LC+: Y Bearing Guide for GT2 32 teeth pulleys — zdjęcie 1
1 / 6

Printrbot LC and LC+: Y Bearing Guide for GT2 32 teeth pulleys

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Upgraded to the Gt2 32 teeth pulleys and only to realized they don't fit at all. Designed a new Y bearing guide that…

Ocena
0 / 5
Polubienia
1
Pobrania
16
Wydruki
0
Wyświetlenia
155
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Upgraded to the Gt2 32 teeth pulleys and only to realized they don't fit at all. Designed a new Y bearing guide that offsets the 608 bearings back a few to make everything fit.

By all means, go for a 18 or 25 teeth instead, don't make the mistake we made!

Instructions

Print

  • Y bearing guide
  • Y bearing roof
  • 4 x M3 10mm long

Important

The M3 x 8mm bolts that came with the Printrbot won't reach the mounting holes so M3 10mm long bolts are needed.

The inner diameter holes may come out smaller than sized either from shrinkage or Slic3r gcode making inner diameter holes .5mm smaller. Some sanding will fix that.

Category: 3D Printer Parts

Tagi