Easter Egg: Double Spiral Interlace
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Elegant Easter eggs with double spiral geometry. Single and dual-color versions for MMU/AMS printing.
- Ocena
- 5 / 5
- Polubienia
- 231
- Pobrania
- 1121
- Wydruki
- 3
- Wyświetlenia
- 4031
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Spring & Easter
- Licencja
- Creative Commons — Attribution
About the Model
A modern take on traditional Easter decorations. This design features a double spiral interlace—a combination of a delicate inner structure and a bolder outer lattice. The result is a visually complex object that plays beautifully with light and shadows.
Available Versions
The model includes two versions:
Single-color: Highlights the clean geometric lines.
Dual-color: Designed for multi-material printing (tested and printed on Bambu Lab H2D). Note: Due to frequent filament swaps, this version has higher material consumption (purge/waste).
Print Settings & Tips
For the best results and print stability, I recommend the following:
Supports: To ensure the model remains stable throughout the print, use manual supports up to 24% of the model's height (slice layer 0.24). This provides the necessary anchor for the overhanging bottom curves.
Post-processing: Once supports are removed, a light sanding of the bottom area will ensure a perfectly smooth finish.
Material: PLA is ideal. Silk filaments work exceptionally well to emphasize the spiral curves.
Resolution: 0.16 mm – 0.20 mm layer height for smooth transitions.
